• Engine

    Model Komatsu SAAD95LE-6
    Type Water-cooled, 4-cycle, direct injection
    Aspiration Turbocharged, aftercooled, cooled EGR
    Number of Cylinders 4
    Bore x Stroke 95 mm x 115 mm
    Piston Displacement 3.26 ltr
    Horsepower, Gross - SAE J1995 50.7 kW / 68 HP
    Horsepower, Net - ISO 9249 / SAE J1349 48.8 kW / 65.5HP
    Rated RPM 1950
    Fan drive method Mechanical
    Emissions certification EPA Tier 4 Final
  • Hydraulic System

    Type HydrauMind System
    Number of selectable working modes 6
    Main pump type Variable displacement, axial piston
    Pump for Boom, arm, bucket, and travel circuits
    Maximum flow 160 ltr/min
    Hydraulic Motors  
    Travel 2 x piston motor with parking brake
    Swing 1 x piston motor with swing holding brake
    Relief Valve Setting  
    Implement circuits 270 kgf/cm3
    Travel circuit 270 kgf/cm3
    Swing circuit 215 kgf/cm3
    Pilot circuit 33 kgf/cm3
    Hydraulic Cylinders Bore x Stroke x Rod diameter
    Boom 1-115 mm x 988 mm x 65 mm
    Arm 1-100 mm x 861 mm x 60 mm
    Bucket 1-90 mm x 710 mm x 55 mm


  • Drives and Brakes

    Steering control Two levers with pedals
    Drive method Fully hydrostatic
    Maximum drawbar pull 66.9 kN 6820 kgf
    Travel speeds 2.8 / 5.0 km/h
    Service brake Hydraulic lock
    Parking brake Mechanical disc
  • Swing System

    Driven by Hydraulic motor
    Swing reduction Planetary gear
    Swing circle lubrication Grease-bathed
    Swing lock Mechanical disc
    Swing speed 10 rpm
  • Undercarriage

    Center frame X-frame leg
    Track frame Box-section
    Track type Sealed track
    Track adjuster Hydraulic
    Number of shoes (each side) 39
    Number of carrier rollers (each side) 1
    Number of track rollers (each side) 5
  • Coolant & Lubricant capacity

    Fuel tank 125 ltr
    Coolant 13 ltr
    Engine 11.5 ltr
    Final drive, each side 1.1 ltr
    Swing drive 2.8 ltr
    Hydraulic tank 56 ltr
    DEF tank None
  • Weights

    Operating weight 8,500 - 8,750 kg

PC88MR-10 Excavators

With a Komatsu new technology engine, the PC88MR-10 is designed for tight-access applications, including excavation, rock work and services placement. It incorporates features of bigger Komatsu excavators, with key components designed and manufactured by Komatsu to work together in an integrated package. And it’s standard with our Komtrax remote monitoring and location system, backed by our Australia-wide service and support network.


Tier 4 Engine KDPF Regeneration
  • 48.8 kW / 66 HP
  • 8,720 kg
  • 0.34 m³

Current Offers

Small Tail Swing

The narrow swing area is well suited for operation in confined areas with only a 325 mm protrusion over the tracks.

Against wall

PC88MR-10 can work in confined spaces with its swing boom design

Large vertical pin and steel bushing

A large vertical pin and steel bushing are used at the boom foot for improved durability. An abrasion-resistant steel bushing further improves service life.

Take the next steps