SPECIFICATIONS

EXPAND ALL COLLAPSE ALL
  • Working ranges

    Height of cut18.9 m
    Radius of cut24.0 m
    Maximum dump reach (furthest distance to center of truck)19.4 m
    Dumping height* (door open)10.8 m
    Floor level radius16.2 m
    Tail swing radius9.9 m
    Operator eye level10.1 m
  • Capacity

    *Payload and dipper capacity are dependent on many factors. Contact Komatsu Mining for an analysis of your specific application.

    Nominal payload*122.5 mt
    Nominal dipper capacity SAE struck 65.7 - 70.3 m3
    Rated suspended load224 mt
    Optimum truck size (360 mt (400 st) truck shown)360 mt
  • Power requirements

    *Voltage per customer requirements

    Supply voltage*7 200 or 13 800 V 3 Phase, 60 Hz 
    Supply voltage*6 000, 6 600, 7 200 or 11 000 Hz 3 Phase, 50 Hz
    Supply transformer(Minimum) 3 750 kVA
    Minimum short circuit VA available at shovel30 MVA
  • Propel

    Propel on demand provides rapid transfer to propel mode. Rapid transfers allow frequent positioning of the shovel to the bank resulting in faster cycle times and more efficient digging.

    Two rugged P&H planetary gear cases of proven design independently transmit torque to the drive sprockets, producing the tractive effort required for fast, efficient propel and positioning operations.

    P&H brand Delta drive low tension sprocket drive system with heavy duty cast crawler shoes.

    Spring-set air release disc brakes – one per motor

  • Crowd

    Twin low inertia AC motors minimize shock loading and boom jacking.

    Direct drive crowd eliminates belt maintenance for improved responsiveness.

    Modular crowd motors with integral pinions provide for simplified motor replacement.

    Two input pinions share load for extended life.

    Dual spring-set air release brakes for reliable redundant operation.

  • Swing

    Three modular P&H planetary gear cases of proven design and a single piece forged swing gear transmit torque for fast cycle times.

    Spring-set air release disc brakes – one per motor.

    Splash lube filtration system.

  • Adaptive controls technology

    All gearing housed in single enclosed gear case with filtered oil circulation for reliable splash lubrication and ease of maintenance.

    Large 68" diameter hoist drum for extended rope bending life. Ferrule becket system and dual electric tuggers are standard for efficient rope change.

    Spring-set air release disc brakes – one per motor.

    Hoist rope fleeting sheave protects rope from excessive oscillation.

  • Hoist

    All gearing housed in single enclosed gear case with filtered oil circulation for reliable splash lubrication and ease of maintenance.

    Large 172.72 cm diameter hoist drum for extended rope bending life. Ferrule becket system and dual electric tuggers are standard for efficient rope change.

    Spring-set air release disc brakes – one per motor.

    Hoist rope fleeting sheave protects rope from excessive oscillation.

4800XPC Electric Rope Shovels

Built for tough environments, the 4800XPC ultra-class three-pass-loading-tool delivers consistent uptime and high cutting force. Engineered for increased digging power and faster cycle times, utilising the latest mining technology.

Direct Drive Crowd

The low inertia design of the responsive, dynamic crowd design system allows fine motion control by shovel operators, high crowd forces to assist with toe penetration, and reduced damage associated with abuse events.

Protects tracks and undercarriage

The P&H Track Shield helps protect your machine’s tracks and undercarriage from dipper strikes. It monitors dipper movement and position to help you predict imminent collisions and takes appropriate actions to mitigate damage to dipper or tracks.

Latest dipper technology

The dipper is one of the hardest working pieces on your shovel. The 4100/4800 features the latest in dipper technology: a low-maintenance latching system, optimal toe penetration and the ability to pass match shovels with trucks.