• Working ranges

    *Height shown with bail-type dipper. Heights will be greater with bail-less or compact-bail dippers. Actual dumping height can be greater than door clearance height.

    Height of cut13.5 m
    Radius of cut21.3 m
    Dumping height* (door open)8.5 m
    Floor level radius14.2 m
    Tail swing radius10.1 m
    Operator eye level7.9 m
  • Capacity

    *Payload and dipper capacity are dependent on many factors. Contact Komatsu Mining for an analysis of your specific application

    Nominal payload*45.4 mt
    Nominal dipper capacity SAE struck 18.3 - 25.5 m3
    Optimum truck size (180 mt (200 st) truck shown)109 - 218 mt
  • Power requirements

    Supply voltage* 4 160 or 7 200 V
    3 phase, 60Hz 
    5 000, 6 000 or 6 600
    3 phase, 50 Hz
    Supply transformer   (minimum) 2 750 kVA
    Minimum short circuit VA available at shovel   22 MVA

    *Voltage per customer requirements

  • Propel

    Two rugged P&H planetary gear cases of proven design independently transmit torque to the drive sprockets, producing the tractive effort required for fast, efficient propel and positioning operations.

    P&H brand Delta drive system with heavy duty cast crawler shoes.

    Spring-set air release disc brakes – one per motor.

  • Crowd

    Powerband V-belt drive between motor and gear case absorbs shock loads.

    First and second reduction gearing in enclosed gear case for reliable splash lubrication, ease of maintenance, and extended component life.

    Twin-leg dipper handle with torsion box and rack and pinion drive has inherent stability in the bank for optimal digging.

    Spring-set air release disc brake.

  • Swing

    Two modular P&H planetary gear cases of proven design and a single piece forged swing gear transmit torque for fast cycle times.

    Spring-set air release disc brakes – one per motor.

    Splash lube filtration system.

  • Hoist

    All gearing housed in single enclosed gear case with filtered and cooled oil fed to all bearings in addition to splash lubrication for reliable operation and ease of maintenance.

    Large 142.24 cm diameter hoist drum for extended rope bending life. Ferrule becket system and dual electric tuggers are standard for efficient rope change.

    Spring-set air release disc brakes – one per motor.

2300XPC AC Electric Rope Shovels

P&H 2300XPC combines the functionality of a high-performance rope shovel with the practicality of a smaller machine. Designed to operate in high production mines, this proven series of shovels are ideal for coal, copper, iron ore and gold mines around the world.

Engineered for performance

In the mines, performance matters. The P&H 2300XPC was designed with the latest in advanced simulation software and built with high-quality steels that are meant to last for 120,000 hours.

Dual planetary propel

Improve your machine performance and reduce maintenance with dual planetary transmissions propel systems that build on the legacy and reliability of P&H manufacturing.

Twin leg handle

The P&H twin leg handle allows the shovel to engage the hardest of materials and easily focus on penetrating the bank instead of wasting energy on twisting or rotating the dipper.