• Working ranges

    *Height shown with bail-type dipper. Heights will be greater with bail-less or compact-bail dippers. Actual dumping height can be greater than door clearance height.

    Height of cut16.8 m
    Radius of cut23.9 m
    Dumping height* (door open)9.5 m
    Floor level radius16.0 m
    Tail swing radius9.8 m
    Operator eye level10.1 m
  • Capacity

    *Payload and dipper capacity are dependent on many factors. Contact Komatsu Mining for an analysis of your specific application.

    Nominal payload*99.8 - 108.9 mt
    Nominal dipper capacity SAE struck SAE 2:1 52.8 - 61.2 m3 58.3 - 67.6 m3
    Rated suspended load195 mt
    Optimum truck size (360 mt (400 st) truck shown)218 - 363 mt
  • Power requirements

    *Voltage per customer requirements

    Supply voltage*7 200 or 13 800 V 3 Phase, 60 Hz 
    Supply voltage*6 000, 6 600, 7 200 or 11 000 Hz 3 Phase, 50 Hz
    Supply transformer(Minimum) 3 750 kVA
    Minimum short circuit VA available at shovel30 MVA
  • Propel

    Propel on demand provides rapid transfer to propel mode. Rapid transfers allow frequent positioning of the shovel to the bank resulting in faster cycle times and more efficient digging.

    Two rugged P&H planetary gear cases of proven design independently transmit torque to the drive sprockets, producing the tractive effort required for fast, efficient propel and positioning operations.

    P&H brand Delta drive low tension sprocket drive system with heavy duty cast crawler shoes.

    Spring-set air release disc brakes – one per motor

  • Crowd

    Powerband V-belt drive between motor and gear case absorbs shock loads.

    First and second reduction gearing in enclosed gear case for reliable splash lubrication, ease of maintenance, and extended component life.

    Twin-leg dipper handle with torsion box and rack and pinion drive has inherent stability in the bank for optimal digging.

    Spring-set air release disc brake.

  • Swing

    Three modular P&H planetary gear cases of proven design and a single piece forged swing gear transmit torque for fast cycle times.

    Spring-set air release disc brakes – one per motor.

    Splash lube filtration system.

  • Hoist

    All gearing housed in single enclosed gear case with filtered oil circulation for reliable splash lubrication and ease of maintenance.

    Large 172.72 cm diameter hoist drum for extended rope bending life. Ferrule becket system and dual electric tuggers are standard for efficient rope change.

    Spring-set air release disc brakes – one per motor.

4100XPC Electric Rope Shovels

Powerful cutting force, maximum load capacity and low-cost-per-ton loading — the P&H 4100XPC AC is engineered to deliver all three, with a unique twin-leg handle design and the latest in rope shovel dipper technology.

Stability throughout the dig cycle

Built to handle hard materials with focus on penetrating the bank, the P&H twin leg handle focuses energy and cutting force by preventing the twisting or rotating of the dipper.

Controls designed to boost production

P&H Adaptive Controls is a suite of integrated control functions designed to build on the strengths of the P&H shovel. Engineered to increase production by up to 9% and eliminate boom jacking by up to 50% with no negative effects on shovel structures.

Delta style undercarriage

Minimise maintenance with a proven shoe and tumbler that requires minimal intervention and allows for operation in a loose track configuration.