• Engine

    ModelKomatsu SAA6D170E-3
    TypeFour-cycle, water-cooled, direct injection
    AspirationTurbo-charged, after-cooled
    Number of cylinders6
    Bore x stroke170 mm x 170 mm
    Displacement23.15 ltr
    Horsepower, Gross - SAE J1995510 kW / 684 HP
    Horsepower, Net - ISO 9249 / SAE J1349502 kW / 672 HP
    Rated RPM2000
  • Operation / Application

    Bucket capacity SAE8.7 - 9.4 m3
    Standard bucket capacity SAE8.7 m3
    Bucket descriptionSpade nose
    Bucket width4330 mm
    Dump clearance at 45° dump angle4085 mm
    Dump reach at 45° dump angle2135 mm
    Static tipping load, full turn41070 kg
    Breakout force 517 kN 52700 kgf
  • Axles and Final Drives

    Drive systemFour-wheel drive
    FrontFixed, full-floating
    RearCentre-pin support, full-floating, 22° total oscillation
    Reduction gearSpiral bevel gear
    Differential gearStraight bevel gear
    Final reduction gearPlanetary gear, single reduction, oil bath
  • Brakes

    Service brakesHydraulically actuated, wet disc brakes actuate on four wheels
    Parking brakeDry-disc, hydraulically released, spring-applied on front axle input shelf
  • Hydraulic System

    Steering System:

    Hydraulic pump Piston pump
    Capacity (at rated rpm) 203 ltr/min
    Relief valve setting

    31.4 MPa

    320 kgf/cm2

    Hydraulic Cylinders:
    Type Double-acting, piston type
    Number of cylinders 2
    Bore x stroke 130 mm x 532 mm



    Loader Control:

    Hydraulic pump Piston pump
    Capacity 405 ltr/min
    Relief valve setting

    31.4 MPa

    320 kgf/cm2

    Hydraulic Cylinders:
    Type Double-acting, piston type
    Number of boom cylinders 2
    Boom cylinder, bore x stroke 225 mm x 1196 mm
    Number of bucket cylinders 1
    Bucket cylinder, bore x stroke 280 mm x 729 mm
    Control valve 2-spool type
    Control Positions:
    Boom Raise, hold, lower, and float
    Bucket Tilt-back, hold, and dump
  • Service Refill Capacities

    Cooling system219 ltr
    Fuel tank1100 ltr
    Engine52 ltr
    Hydraulic system470 ltr
    Axle front245 ltr
    Axle rear245 ltr
    Torque converter and transmission105 ltr
  • Steering System

    TypeArticulated type, fully hydraulic power steering
    Steering angle40° each direction
    Minimum turning radius at centre of outside tyre8280 mm
  • Transmission

    Torque converter Three-elements, single-stage, single-phase
    Transmission Full-powershift, automatic planetary type
    Travel speed Forward Reverse
    1st gear 6.4 km/h 7.1 km/h
    2nd gear 11.1 km/h 12.2 km/h
    3rd gear 18.7 km/h 20.5 km/h
    4th gear 30.0 km/h 32.3 km/h
    Measured with 40/65-39, 36PR (L5) tyres
  • Tyres

    Standard tyres45/65 R39 L5 tyres
  • Weights

    Operating weight71,020 - 73,000 kg

WA700-3 Wheel Loaders

Designed for bucket sizes from 8.7-9.4 cu m, our proven WA700-3 loader is designed for production loading in large quarries, minesite face-loading, and ROM stockpile and cleanup work. As with all our wheel loaders, key components are designed and manufactured by Komatsu to work together in an integrated package. And it comes standard with our Komtrax remote monitoring and location system, backed by our Australia-wide service and support network.

  • 502 kW / 672 HP
  • 71,600 kg
  • 8.7 m³

Current Offers

Wet Multi-Disc Brakes and Hydraulic Braking System

The wet disc brakes are fully sealed which means contaminants are kept out, reducing wear and resulting maintenance. Brakes require no adjustments for wear, meaning even lower maintenance. The parking brake is also an adjustment-free dry disc mounted to the front driveline for high reliability and long life.

Komatsu's Exclusive AJSS

The Advanced Joystick Steering System (AJSS) reduces operator fatigue and increases total productivity while achieving exceptional control in tight loading conditions. THe seat-mounted controller allows a full range of adjustments for the most comfortable fit.

Take the next steps