SPECIFICATIONS

EXPAND ALL COLLAPSE ALL
  • Tub and shoes

    ** Shoe ground pressure assumes 80% of machine weight is on shoes

    Tub diameter26.8 m
    Ground pressure (tub)138 kPa
    Tub/deck clearance2.0 m
    Rail circle diameter23.8 m
    Quantity and diameter of rollers171 x 406 mm
    Pitch diameter, swing rack22.1 m
    Shoe size (maximum dimensions)5.2 x 26.8 m
    Ground pressure (shoes)**225.2 kPa
    Width across shoes38.1 m
    Clearance under shoes0.6 m
    Normal length of step2.3 m
  • Working ranges

    Suspended load rating344 736 kg
    Boom length113.1 m
    Boom angle35.8 deg
    Operating radius105.9 m
    Dig depth (practical)64.8 m
    Dumping height48.1 m
  • Rotating frame and house

    Length machinery house38.9 m
    Width of machinery house36.4 m
    Rear end radius27.4 m
    Center pin to boom foot12.2 m
    Boom foot height5.9 m
    Rotating frame depth3.68 m
  • Weights (x 1,000): standard

    *without bucket, weights are approximate

    Net weight7 532.5 kg
    Counter weight439.1 kg
    Working weight*7 971.6 kg
  • Rope and drum diameters

    Hoist ropes133.4 mm
    Drag ropes133.4 mm
    Hoist drum335 cm
    Drag drum335 cm
  • AC motors: standard

    Type Quantity Rated HP  Rated volts
    Hoist motors 8 1 800 690
    Drag motors 8 1 800 690
    Swing motors 8 1 150 690
    Walking motors 4 1 430 690
    Inverter cabinets 8 Water cooled IGBT - AFE
  • Boom and fairlead

    Boom construction4 Wide flanged chords with line pipe lacing
    Boom materialHSLA
    Boom point sheavePivoting - 4 064 mm diameter
    FairleadConstant Contact Style
    Fairlead sheaves4 064 mm diameter

P&H 9020XPC Draglines

No matter what boom length, bucket capacity or geometry you need, you’ll find a P&H dragline built from the ground up to deliver long-term, consistent, reliable performance.

Current Offers

Tub engineered to perform

Built for long life and low maintenance, P&H tubs handle multi-directional loads and verti-shield welding joins on all intersection plates with one continuous weld resulting in minimal distortion with widely distributed loading and low residual stresses.

Intelligent, productivity-focused electronics

Track your machine’s performance to support efficient operation and maintenance activities. The Centurion control system utilises smart electronics to monitor dragline operation.

Highly engineered boom and A-frame

Stability, excellent visibility of boom point sheaves and balanced axial working loads with the four-chord boom with flat underside. For maximum-rated suspended load, the A-frame is engineered to keep load forces low.