Skip Ribbon Commands
Skip to main content
Navigate Up
Sign In
Home > Equipment > Excavators > PC200-8

Industry: ALL

Excavators - PC200-8M0

Download Specifications Enquire

Overview

 

The PC200-8M0 incorporates a holistic, integrated design with a host of standard factory installed items to provide piece of mind and compliance with industry expectations.  It combines Dash 8 quality and performance with new fuel saving technology to further improve fuel efficiency, upgraded monitor / KOMTRAX functionality and high capacity air conditioning with increased cool down performance.

This 21+ tonne excavator includes the latest technology, ergonomics and features.  It is suited to many applications and is used extensively in general construction and rental fleets. 
 
Low cost of ownership is achieved through a reliable and highly productive machine.

Specifications

Engine

Model
Komatsu SAA6D107E-1
Horsepower, Gross - SAE J1995 (kW)
110
Horsepower, Net - ISO 9249 (kW)
103
Horsepower, Net - SAE J1349 (kW)
103
Rated RPM
2000
Fan drive method
Mechanical
Displacement (litre)
6.69
Number of cylinders
6
Related information
Komatsu water-cooled, turbocharged, after cooled, Tier III compliant, common rail direct injection diesel engine.

Weights

Operating weight - total (kg)
​21,200
Bucket weight – KGA GP (kg)
830
Quick hitch weight – KGA (kg)
306 

Operation / Application

Boom size (m) & type
5.700 Heavy Duty
Arm size (m) & type
2.925 Heavy Duty
Bucket size – KGA standard GP (m3)
0.97
Arm crowd force – ISO (kgf)
11,000
Bucket crowd force – ISO (kgf)
15,200
Digging depth – maximum (mm)
6,620
Digging reach – maximum (mm)
9,875
Maximum reach @ ground level (mm)
9,700
Tail Swing radius (mm)
2,750
Related information
Komatsu Genuine Attachments available include a dynamic cast quick hitch and selection of bucket solutions.

Driveline and Swing

Drawbar pull, maximum (kg)
​18, 200
Gradeability (%)
70
Travel speeds (km/h)
3.0 / 4.1 / 5.5
Swing speed (rpm)
12.4
Related information
The travel speed control has an automatic function.

Undercarriage

Shoe size & type
​600mm triple grouser
Related information

Hydraulic System

Type
​HydrauMind System
Selectable work modes
6
Economy sub-mode selections
4
Main pump type
Variable displacement piston
Maximum flow rate (ltr/min)
439
Related information
Includes factory fitted: dual flow hammer piping; quick hitch piping, safety switch; boom and arm burst valves with overload alarm.

Dimensions (transport position)

Length, overall (mm)
​9,425
Track length on ground (mm)
3,275
Track gauge (mm)
2,200
Overall track width (mm)
2,800
Overall height (mm)
3,040
Ground clearance (mm)
440
Related information
Overall height is at transport position. 

Service information

Fuel tank (litre)
​400

Communication systems

Internal maintenance monitoring
Yes​.
KOMTRAX Satellite tracking
Hourly Fuel Usage
Yes
Yes
                                                                        

Standard Fitment

ENGINE & RELATED ITEMS
- Engine, Komatsu SAA6D107E-1, 110kW (147 HP), water-cooled,
  turbocharged, after-cooled, Tier III compliant, common rail direct injection disel.
- Air cleaner, double element, dry type with dust indicator.
- Air pre-cleaner, Enginaire.
- Cooling fan with side by side coolers.
 
ELECTRICAL SYSTEM
- Alternator, 24V, 60 Ampere.
- Batteries, large capacity x 2.
- Starter motor, 24V, 5.5kW.
- Voltage reducer 24v to 12v, in cabin with socket.
 
TRAVEL & BRAKE SYSTEM
- Travel speed control, 3-stage automatic.
 
UNDERCARRIAGE
- Track rollers, single flanged.
- Track shoes, 600mm triple grouser with sealed and greased track links.
 
PROTECTORS, GUARDS AND COVERS
- Engine side covers, perforated.
- Cab windscreen guard, lower part.
- Revolving frame under cover.
- Track frame under cover.
- Bump rails on revolving frame.
- Track roller guards (1 x each side).
 
HYDRAULICS & CONTROLS
- "HydrauMind" closed centre load sensing system (CLSS).
- Boom holding valve.
- Arm holding valve.
- PPC hydrualic control system.
- Power maximizing system.
- Quickhitch piping, factory fitted, safety switch & alarm.
- Burst valve protection, factory fitted, boom & arm, overload alarm.
- Hammer piping, factory fitted, dual flow.
 
SPECIAL ARRANGEMENTS
- EPA Tier III regulation arrangement.
- EU Stage IIIA emission regulation arrangement.
- Poor fuel arrangement (water separator).
- Hot area arrangement (-20 to 50 deg. C)
 
SAFETY EQUIPMENT
- Rearview mirror (RH, LH & sidewise).
- Hand rails and non-slip grip surfaces.
- Camera, factory fitted, single, rear, (plus wiring for additional).
- Emergency stops, factory fitted, (Qty - 3).
- Beacon, rotating type with guard.
- Overhead Protective Guard (OPG Level 2).
 
OPERATOR ENVIRONMENT
- ROPS and OPG Level 1 certified cabin with low noise level, all weather sound 
  suppressed type with viscous mounts, lockable door, fixed RH and rear windows,
   provisions for vandal covers.
- Instrument panel, Large LCD colour monitor with in-built machine diagnostics.
- 6 mode multi selection function buttons, 4 sub-economy modes, eco-guage,
   eco guidance and real time fuel consumption analysis.
- Equipment Management Monitoring System (EMMS).
- Seat, suspension type, fabric, reclining & tiltable arm rests.
- Seat belt, 78mm, retractable.
- Large capacity air conditioner, automatic.
- Radio, AM/FM, domestic frequency range.
- Provision for UHF radio.
 
OTHER STANDARD EQUIPMENT
- Markings and Caution plates for Australia/NZ.
- Painting, Komatsu standard colouring.
- Starting swith key, operable by master key.
- Pressue regulator valve, set pressure 250kg/cm2.
- Work lights, 6 standard; 1 x boom, 1 x RHS near steps, 2 x cab top, 1 x rear on cab,
   1 x counterweight.
- Travel alarm.
- Lifting capacity chart.
- Komatsu Machine Tracking System, (KOMTRAX).
 
WORK EQUIPMENT
- Boom assembly, 5,700mm, heavy duty, with 2 x boom cylinders and 1 x arm cylinder.
- Arm assembly, 2,925mm, heavy duty, with 1 x bucket cylinder.
- Counterweight, standard.
- Work equipment bushings for 100hr greasing interval.
 
MATERIALS
- Operation and maintenance manual, two sets.
- Parts books, two sets.
 
WARRANTY
- Premium warranty - 36 months / 6,000 hours.
"Specification is subject to change without notice"

Optional Equipment

​Contact a Komatsu sales representative for optional equipment information.

Features

Key Features
Popular conventional excavator size suited to many applications and used extensively in general construction and rental fleets. Low cost of ownership is achieved through a reliable and highly productive machine.

> Safety cab design and a reliable 6 cylinder engine offers quiet and comfortable machine operation
> Factory fitted options ensure consistent quality in machine construction
> Modern easy to use machine controls and safety cab layout
> Komtrax machine management and security system

Productivity
> Powerful, turbocharged, air to air aftercooled, low emission Tier III compliant 6
   cylinder Komatsu engine.
> Smooth and fast operation using HydrauMind integrated hydraulic control system.
> Integrated 2 x VDP hydraulic pump to enhance multi-function operations.
> 6 work modes (including economy mode for attachments) and adjustable flow rates
   to match work application.
 
Efficiency
> Reduced fuel consumption using HPCR fuel delivery, advanced combustion technolgy,
   reduced auto-deceleration speeds, cooling system improvements and reductions in
   hydraulic loss.
> More efficient use of engine power through CLSS hydraulics.
> Faster cycle times using arm quick return hydraulic circuit.
> 4 economy modesoptions to match application requirements.
 
Quality and Safety
> Lowest noise levels in class.
> Factory fitted Hammer Piping and Quick Hitch Piping.
> Large high visibility safety cab with ROPS  certification and OPG Level 1 compliance.
> OPG Level 2 Guard fitted (standard).
> Factory fitted rear camera. 
> Factory fitted emergency stops (3).  
> Factory fitted boom and arm burst valves with overload alarm and level indicator.
> Safety switch and alarm on quick hitch circuit.

Ergonomics and Systems
> Low vibration levels due to viscous damper cab mounting.
> High resolution 7 inch LCD colour monitor for high visibility display.
> High capacity automatic air conditioner with pressurised cab.
> Equipment Management Moniotring System (EMMS) for component monitoring.
 
Maintenance
> Upgraded KOMTRAX, offering machine monitoring and reportable data.
> Ground access to components for easy maintenance.
> Side by side cooling for efficiency and ease of cleaning and maintenance.
> Excellent fuel filtration through a 2 micron filter and pre-filter.
> Extended maintenance intervals (500hr engine oil).